ASTM A36 steel

Classification ：

Carbon Steel

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction
ASTM A36 Carbon Structural Steel Plate

ASTM A36 steel plate is the most widely used hot-rolled steel product. As a kind of carbon structural steel product, its relative products are round rod steel, angle bar, and steel sections such as I-Beams, H-beams, angles, and channels. Hot rolled ASTM A36 has rough surface on the final product, it’s easy for further processing like machining.
Chemical Composition analyze:
ASTM A36 belongs to general low carbon steel, steel product with low carbon content less than 0.3%，it is considerably soft for easy forming, machining, welding. Heat treatment has less effect on ASTM A36 steel material. It contains some other elements including alloy element: manganese, sulfur, phosphorus and silicon. Iron and these elements together forms unique mechanical property of ASTM A36, unlike stainless steel with nickel and chromium element, it doesn’t show good corrosion resistance. If you need corrosion resistant property, having it painted with a layer of plating is a good choice.

Technical data

ASTM A36 Hot Rolled Steel Plate	Chemical Compostion
	Element	content
	Carbon, C	0.25 - 0.290 %
	Copper, Cu	0.20 %
	Iron, Fe	98.0 %
	Manganese, Mn	1.03 %
	Phosphorous, P	0.040 %
	Silicon, Si	0.280 %
	Sulfur, S	0.050 %

Physical Property Analyze:
Qualified A36 steel product shall have ultimate tensile strengths ranges from 58,000 to 79,800 psi. It is not a exact number for it is affected by its chemical composition and production method. In tensile testing, ASTM A36 steel bar can elongate to around 20% of its original length. It also shows excellent impact strength at room temperature.

Physical Property	Metric	Imperial
Density	7.85 g/cm3	0.284 lb/in3

Mechanical Property:

ASTM A36 Hot Rolled Steel Plate
Mechanical Properties	Metric	Imperial
Tensile Strength, Ultimate	400 - 550 MPa	58000 - 79800 psi
Tensile Strength, Yield	250 MPa	36300 psi
Elongation at Break (in 200 mm)	20.0 %	20.0 %
Elongation at Break (in 50 mm)	23.0 %	23.0 %
Modulus of Elasticity	200 GPa	29000 ksi
Bulk Modulus (typical for steel)	140 GPa	20300 ksi
Poissons Ratio	0.260	0.260
Shear Modulus	79.3 GPa	11500 ksi

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.