416HT Stainless Steel Sheet

Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels.

Classification ：

Stainless Steel Plate

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction

Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels. It has much better machining properties than the austenitic grades, but lower corrosion resistance.It has the highest machinability of any stainless steel at about 85% of that of a free-machining carbon steel. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant. Although Alloy 416HT and other martensitic stainless steels are not as resistant as austenitic or ferritic stainless, it still demonstrates good corrosion and oxidation resistance plus high strength in the hardened and tempered condition. Alloy 416HT is easily machined, is always magnetic, and has low frictional properties that reduce galling and seizing.

Thickness(mm)	0.2-200mm
Width(mm)	600-2500mm
Grade	200 Series/300Series/400Series/500Series/600Series
Color	White Bright
Surface	2B, BA, No.4, HL, Mirror, 8K
Standard	201, 202, 301, 302, 303, 304, 304L, 316, 316L, 316N, 321, 309S, 310S, 317L, 904L, 409L
Edge	Mill Edge Slit Edge
Packing	Export Standard
Temper	Full hard, half hard, soft
Sample	Provided within 3 Days
Technique	Hot Rolled/Cold Rolled
Application	Bridges,shipbuilding,automobiles,structural steel plates,springs,etc.

Technical data

Applications:

Alloy 416HT is generally used for parts that are extensively machined and require the corrosion resistance of a 13% chromium stainless steel. Applications that generally use Alloy 416 include:

Electrical motors
Nuts and bolts
Pumps
Valves
Automatic screw machine parts
Washing machine components
Studs
Gears

Standards:

ASTM/ASME: UNS S41600
EURONORM: FeMi35Cr20Cu4Mo2
DIN: 2.4660

Corrosion Resistance:

Demonstrates corrosion resistance to natural food acids, waste products, basic and neutral salts, natural waters, and most atmospheric conditions
Less resistant that the austenitic grades of stainless steel and also the 17% chromium ferritic alloys
High sulfur, free-machining grades like Alloy 416HT are unsuitable for marine or other chloride exposure
Maximum corrosion resistance is achieved in the hardened condition, with a smooth surface finish

Heat Resistance

Fair resistance to scaling in intermittent service up to 1400^oF (760^oC) and up to 1247^oF (675^oC) in continuous service
Not recommended for use in temperatures above the relevant tempering temperature if maintenance of mechanical properties is important

Welding Characteristics

Poor weldability
If welding is necessary use Alloy 410 low hydrogen electrodes
Pre-heat to 392 to 572°F (200-300°C)
Follow immediately with annealing or re-hardening, or a stress relief at 1202 to 1247°F (650 to 675°C)

Machinability

Has outstanding machinability
Best machinability is in the sub-critical annealed condition

Chemical Properties:

	C	Mn	Si	P	S	Cr
416HT	0.15 max	1.25 max	1.00 max	0.06 max	0.15 max	min: 12.0 max: 14.0

Mechanical Properties:

Tempering Temperature (°C)	Tensile Strength (MPa)	Yield Strength 0.2% Proof (MPa)	Elongation (% in 50mm)	Hardness Brinell (HB)	Impact Charpy V (J)
Annealed *	517	276	30	262	–
Condition T **	758	586	18	248-302	–
204	1340	1050	11	388	20
316	1350	1060	12	388	22
427	1405	1110	11	401	#
538	1000	795	13	321	#
593	840	705	19	248	27
650	750	575	20	223	38
* Annealed properties are typical for Condition A of ASTM A582.
** Hardened and tempered Condition T of ASTM A582 – Brinell Hardness is specified range, other properties are typical only.
# Due to associated low impact resistance this steel should not be tempered in the range 400-

Physical Properties:

Density kg/m³	Thermal Conductivity W/mK	Electrical Resistivity (Microhm/cm)	Modulus of Elasticity	Coefficient of Thermal Expansion µm/m/°C	Specific Heat (J/kg.K)	Specific Gravity
7750	24.9 at 212°F	43 at 68°F	200 GPa	9.9 at 32 – 212°F	460 at 32°F to 212°F	7.7
	28.7 at 932 °F			11.0 at 32 – 599°F
				11.6 at 32-1000°F

FAQ
Q:Will you delivery the goods on time?
A:Yes,we promise to provide best quality products and delivery on time.Honesty is our company's tenet.
Q:Do you provide samples?is it free or extra?
A:The sample could can provide for customer with free,but the courier freight will be covered by customer account.
Q:Do you accept the third party inspection?
A:Yes absolutely we accept.
Q:What are your main products?
A:Carbon steel,alloy steel,stainless steel plate/coil,pipe and fittings,sections etc.
Q：Can you accept the order of customzied?
A：Yes,we assure.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.