316 316L Stainless Steel Sheet

Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.

Classification ：

Stainless Steel Plate

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product information

Corrosion Resistance
In most applications Alloy 316/316L has superior corrosion resistance to Alloy 304/304L. Process environments that do not corrode Alloy 304/304L will not attack this grade. One exception, however, is in highly oxidizing acids such as nitric acid where stainless steels containing molybdenum are less resistant. Alloy 316/316L performs well in sulfur containing service such as that encountered in the pulp and paper industry. The alloy can be used in high concentrations at temperatures up to 120°F (38°C).

Alloy 316/316L also has good resistance to pitting in phosphoric and acetic acid. It performs well in boiling 20% phosphoric acid. The alloy can also be used in the food and pharmaceutical process industries where it is utilized to handle hot organic and fatty acids in an effort to minimize product contamination.

Alloy 316/316L performs well in fresh water service even with high levels of chlorides. The alloy has excellent resistance to corrosion in marine environments under atmospheric conditions.

The higher molybdenum content of Alloy 316/316L assures it will have superior pitting resistance to Alloy 304/304L in applications involving chloride solutions, particularly in an oxidizing environment.

In most instances, the corrosion resistance of Alloys 316 and 316L will be roughly equal in most corrosive environments. However, in environments that are sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones Alloy 316L should be used because of its low carbon content.

Grade	201/202/301/303/304/304L/316/316L/321/310S/401/409/410/420J1/420J2/430/439/443/444
Surface Finish	2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect
Standard	JIS/SUS/GB/DIN/ASTM/AISI/EN
Technique	Cold Rolled; Hot Rolled
Thickness	0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements
Width	1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm
Length	2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required
Color	Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect
Application	Interior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure; Shipbuilding
Lead Time	7-15 working days after the receipt of 30% deposit
Payment Terms	30% TT for deposit,70% TT /70% balance before shipment
Price Terms	FOB, EXW, CIF, CFR
Packing	Wooden Pallet or according to customer's requirements

Technical data

	Composition (Weight Percent)				CCT2	CPT3
ALLOY	Cr	Mo	N	PREN1	°F (°C)	°F (°C)
Type 304	18.0	—	0.06	19.0	<27.5 (<-2.5)	— —
Type 316	16.5	2.1	0.05	24.2	27.5 (-2.5)	59 (15.0)
Type 317	18.5	3.1	0.06	29.7	35.0 (1.7)	66 (18.9)
SSC-6MO	20.5	6.2	0.22	44.5	110 (43.0)	149 (65)

Chemical Analysis

Weight % (all values are maximum unless a range is otherwise indicated)

Element	316	316L
Chromium	16.0 min.-18.0 max.	16.0 min.-18.0 max.
Nickel	10.0 min.-14.0 max.	10.0 min.-14.0 max.
Molybdenum	2.00 min.-3.00 max.	2.00 min.-3.00 max.
Carbon	0.08	0.030
Manganese	2.00	2.00
Phosphorus	0.045	0.045
Sulfer	0.03	0.03
Silicon	0.75	0.75
Nitrogen	0.1	0.1
Iron	Balance	Balance

Stainless steel coils surface finish characteristics

Surface finish	Characteristics and application
2B	The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses.
NO.1	Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc.
NO.4	Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc.
BA	Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc.
8K	The product have excellent brightness and prefer reflexivity can to be the mirror.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.