A633 Grade C Low alloy steel plate

The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness

Classification ：

Carbon Steel

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product information

Under specification ASTM A633/A633M,it covers steel grade A633 Grade A,A633 Grade C,A633 Grade D as well as A633 Grade E.All the steel plates belong to Normalized high strength low alloy structural steel for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level. The material shall have fine austenitic grain size and shall be normalized by heat treatment. Its chemical composition shall be determined by heat analysis. Tension tests shall also be done.

Heat Treatment: Normalized,for A633 Grade E material over 75mm in thickness shall be double normalized or As rolled ( If customer indicated in their order and accepted)

Weldability:When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 no id found of Specification A 6/A 6M for information on weldability.

Chemical composition & Mechanical property

Note: For A633 Grade C manganese content may be increased to 1.60% maximum provided the carbon content does not exceed 0.18%.

Steel Grade	Chemical composition % ≤
	C	Mn	Si	P	S	Nb
A633 Grade C	0.20	1.15-1.50	0.15-0.50	0.035	0.040	0.01-0.05

For steel plate A633 Grade C Belows 65mm in thickness,Tensile Strength shall be between 485-620 Mpa.Yield Strength shall be above 345 Mpa.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.