ASTM A302 Grade A Mn-Mo Alloy Pressure Vessel Steel Plate

A302 Grade A steel plates standard specification for pressure vessel plates in alloy steel, manganese molybdenum and manganese-molybdenum-nickel. A302 Grade A steel plate shall be normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. If A 302 Grade A above 50mm in thickness shall be normalized.

Classification ：

Boiler Pressure Vessel Steel

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

ASTM A302 Grade A Mn-Mo Alloy Pressure Vessel Steel Plate Descriptions:

This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels. ASTM A302 is a kind of low alloy steel specification covers 4 different grades(A, B, C, D), Grade C and D contains chemical composition Ni, with the same thickness, yield and tensile strength of Grade C is the same of Grade B, while elongation rate of grade C is higher.This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels. ASTM A302 is a kind of low alloy steel specification covers 4 different grades(A, B, C, D), Grade C and D contains chemical composition Ni, with the same thickness, yield and tensile strength of Grade C is the same of Grade B, while elongation rate of grade C is higher. It is manufactured for Pressure Vessel, Boiler, Storage Tanks and Heat Exchanger in Oil, Gas Project.
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm

Chemical Composition and Mechanical Properties:

A302 Grade A Chemical Composition
Carbon, max	%	Manganese, max	%	Silicon, max	%	Sulfur max	%
25mm or under	0.2	Heat Analysis	0.95-1.30	Heat Analysis	0.15-0.40	All thick	0.035
25-50mm	0.23	Product Analysis	0.87-1.41	Product Analysis	0.13-0.45
over 50mm	0.25
		Molybdenum max	%	Nickel max	%	Phosphorus	%
		Heat Analysis	0.45-0.60	Heat Analysis	…	All thick	0.035
		Product Analysis	0.41-0.64	Product Analysis	…	All thick	0.035

Mechanical Property of A302 Grade A steel plate	A302 Grade A
Tensile strength, kis [MPa]	75-95 [515-655]
Yield strength, min, kis [MPa]	45 [310]
Elongation in 8 in. [200 mm], min, %	15
Elongation in 2 in. [50 mm], min, %	19

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.