30CrMnSiA hot rolled steel sheet

GB T-3077 30CRMNSIA standard applies to manufacture of bearing ring steel pipe rolling elements made by high-carbon chromium bearing steel processed with hot rolled forged round, steel wire, cold rolled. Continuous casting steel is not recommended to be the material of balls.

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction

Alloy structural steel is a kind of steel which is used as mechanical parts and various engineering components, whichcontains one or more alloy elements.
30CrMnSiA is a medium carbon with high strength and poor welding performance.
30CrMnSiA has high strength and sufficient toughness after quenching and tempering, and hardenability is also good. After quenching and tempering, the material can be used as a grinding wheel shaft, gears and sprockets.
30CrMnSiA has good processability, small processing deformation and good fatigue resistance. For shaft and piston parts and so on. It is used in various special wear parts such as automobiles and airplanes.
The material is darker in color and galvanized can add aesthetics and rust.

SUPPLY RANGE OF of GB/T 30CrMnSiA

-Dimension: Diameter 4-1600 mm, any length below 16 meters

-Delivery Conditions:

Cold drawn: 4-100 mm

Peeled: 30-160 mm

Grinded: 4- 600 mm

Turned: 130-1200 mm

Hot rolled: 12-320 mm

Hot forged: 130-1600 mm

-EAF+(ESR) or EAF+LF+VD+(ESR)

-HOT rolled; Cold rolled; Forged; Cold Drawn

-Heat Treatment: Untreated, Annealing, N+T, Q+T

-Smelting: EAF+LF+VD (+ESR)

-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request

-UT 100% passed

-Cutting service provided

-Third Party inspection is acceptable (SGS, BV etc.)

Technical data

Grade	C	Si	Mn	P	S	Ni	Cr	Cu
30CrMnSiA	0.28- 0.34	0.90- 1.20	0.80- 1.10	0.025 max	0.025 max	≤ 0.40	0.80- 1.10	≤ 0.25

Mechanical properties

Yield strength σs/MPa (>=)

Tensile strength σb/MPa (>=)

Elongation

δ5/% (>=)

Reduction of

area ψ/% (>=)

Impact absorbing energy Aku2/J (>=)

Hardness HBS

100/3000 max

835

1080

229

APPLICATIONS
Grinding wheel shaft, gears and sprockets
Special waer parts of automobiles and airplanes
Kinds of tool shaped cutlery
Shaft and piston parts

Quality Assurance

Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.