40Cr hot rolled steel round bars

GB 40CR alloy Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality low carbon,Low alloy chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardness is 28-34 HRc. GB 40CR steel Annealing delivery hardenss less than 250HB.40CR With a lower carbon content range, So GB 40CR alloy steel have good weldability.

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

40Cr hot rolled steel round bars information

40Cr alloy structural steel has higher tensile strength, yield strength and hardenability than No. 40 steel, but its weldability is limited and there is a tendency to form cracks. 40Cr is a medium carbon modulated steel, cold heading die steel. The steel is moderately priced and easy to process. After proper heat treatment, certain toughness, plasticity and wear resistance can be obtained. Normalizing can promote the spheroidization of the structure and improve the cutting performance of the blank with a hardness less than 160HBS. Tempering at a temperature of 550~570℃, the steel has the best comprehensive mechanical properties. The hardenability of this steel is higher than that of 45 steel, and it is suitable for surface hardening treatment such as high frequency quenching and flame quenching. After quenching and tempering, 40Cr steel is used to manufacture mechanical parts under medium load and medium speed, such as car steering knuckles, rear half shafts and gears, shafts, worms, spline shafts, top sleeves on machine tools, etc.; after quenching and After tempering at medium temperature, it is used to manufacture parts that bear high load, impact and medium speed work, such as gears, spindles, oil pump rotors, sliders, collars, etc.; after quenching and low temperature tempering, it is used to manufacture parts that bear heavy loads and low impact And parts with wear resistance and the solid thickness on the cross section below 25mm, such as worms, spindles, shafts, collars, etc.; after quenching and tempering and high-frequency surface quenching, they are used to produce high surface hardness and wear resistance. Parts with great impact, such as gears, sleeves, shafts, main shafts, crankshafts, spindles, pins, connecting rods, screws, nuts, intake valves, etc. In addition, this steel is suitable for manufacturing various transmission parts for carbonitriding, such as gears and shafts with larger diameters and good low temperature toughness.

40Cr hot rolled steel round bars Chemical and Mechanical

Product parameters

Chemical composition

C(％)	0.37～0.44	Si(％)	0.17～0.37	Mn(％)	0.50～0.80	P(％)	≤0.030
S(％)	≤0.030	Cr(％)	0.80～1.10

Mechanical Properties

The mechanical properties of annealed GB 40CR alloy steel are outlined in the table below

Tensile	Yield	Bulk modulus	Shear modulus	Poisson’s ratio	Izod Impact
KSI	KSI	KSI	KSI		ft.lb
76900	55800	20300	11600	0.27-0.30	84.8

Heat treatment Related

Annealing of 40CR Alloy structural steel

Slowly heated to 850 ℃ and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The 40CR alloy steel will get MAX 250 HB （Brinell hardness）.

Hardening of 40CR Alloy structural steel

Heated slowly to 880-920°C, Then after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.

Equivalent Of 40Cr alloy Structure Steel

USA	Germany	China	Japan	France	England	Italy	Poland	ISO	Austria	Sweden	Spain
ASTM/AISI/UNS/SAE	DIN,WNr	GB	JIS	AFNOR	BS	UNI	PN	ISO	ONORM	SS	UNE
5140 / G51400	41Cr4 / 1.7035	40Cr	SCr440	42C4	530A40 / 530M40			41Cr4		2245

Applications

GB 40CR steel is widely used for a variety of applications in the used in the automotive and engineering industries for toolholders and other such components. Typical applications such as valve bodies, pumps and fittings, Shaft, the high load of wheel, bolts, double-headed bolts, gears, etc

Regular size and Tolerance

Steel round bar: Diameter Ø 5mm – 3000mm

Steel plate: Thickness 5mm – 3000mm x Width 100mm – 3500mm

Steel Hexagonal bar: Hex 5mm – 105mm

Others 40CR have not specified size, pls contact our experienced sales team.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.