50Mn-60Mn hot rolled steel round bars

50Mn round steel is used to manufacture heat-treated parts that require high wear resistance and are subjected to high loads, such as gears, gear shafts, and mandrels with a section below 80mm.

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction

Material name: high quality carbon structural steel
Grade: 50Mn
Characteristics and scope of application:
50Mn round steel has high strength, elasticity and hardness. It is mostly used after quenching and tempering, and its welding performance is poor. 50Mn round steel
The performance is similar to that of No. 50 steel, but its hardenability is higher, and the strength, hardness and elasticity after heat treatment are slightly higher than that of No. 50 steel. It has poor weldability, and has a tendency to overheat sensitivity and temper brittleness. Used as stress-bearing parts, high wear-resistant parts, such as gears, gear shafts, friction discs, spindles, flat springs, etc.

60Mn Carbon Steel is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery.60Mn’s strength, elasticity and hardness are all higher. 60Mn has good machinability and poor Cold deformation plasticity and weldability under the condition annealing.60Mn has sensitive and temper brittleness tendency for overheating. 60Mn is suitable for large size spiral spring, leaf-spring. All kinds of round flat spring. Spring ring plate, cold drawn steel wire and spring.

Technical data

60Mn Carbon Steel Round Bars Chemical Composition

Grade	Chemical composition %:
Grade	C	Si	Mn	S	P	Cr	Ni	Cu
60Mn	0.57-0.65	0.17-0.37	0.70-1.00	≤0.035	≤0.035	≤0.25	≤0.30	≤0.25

60Mn Carbon Steel Round Bars Mechanical Properties

Grade	mechanical properties:
	Tensile strength σb (Mpa)	Yield strength σb (Mpa)	Elongation δ5/（%）	reduction of area ψ (%)	Hardness No heat treatment
	min	min	min	min	max
60Mn	695	410	11	35	269HB

Competitive Advantage:

1. We offer you our best price with good quality of the materials.

2. We will deliver the materials strictly according to the the delivery date noted on the contract.

3. We also always have the huge ready stock for sell.

4. We have complete after-sale service to deal with the problems in time.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.