W6Mo5Cr4V2(M2) hot rolled steel round bars

M2 is a molybdenum high-speed steel, which has the advantages of small carbide non-uniformity and high toughness. It is easy to overheat, so the quenching temperature should be strictly controlled, and the protection requirements for heat treatment should be strict

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction

M2 is molybdenum series high-speed steel, has the advantages of small carbide inhomogeneity and high toughness. Easy to overheating, should strictly control the quenching heating temperature, the more strict protection for heat treatment. Because of its hardness and wearability, used in the manufacture of cutting more difficult to cutting tool materials. M2 high-speed steel with carbide orientation is bigger, so the more strict protection for heat treatment is suitable for the mold vibration and shock loads.

Technical data

Similar Grade

Execution Standard	ZEICIN Grade	GB	AISI	JIS	DIN
GB/T9943-2008	M2	W6Mo5Cr4V2	M2	SKH51	1.3343

Chemical Composition of M2 Tool Steel Material

ASTM A681	C	Si	Mn	P	S	Cr	Mo	V	W
M2/ T11302	0.78～0.88	0.20～0.45	0.15～0.40	0.030 Max	0.030 Max	3.75～4.50	4.50～5.50	1.75～2.20	5.50～6.75
DIN 17350	C	Si	Mn	P	S	Cr	Mo	V	W
1.3343/ S6-5-2	0.86～0.94	≤0.45	≤0.40	0.030 Max	0.030 Max	3.80～4.50	4.70～5.20	1.70～2.00	6.00～6.70
GB/T 9943	C	Si	Mn	P	S	Cr	Mo	V	W
W6Mo5Cr4V2	0.80～0.90	0.20～0.45	0.15～0.40	0.030 Max	0.030 Max	3.80～4.40	4.50～5.50	1.75～2.20	5.50～6.75
JIS G4403	C	Si	Mn	P	S	Cr	Mo	V	W
SKH51/SKH9	0.80～0.88	≤0.45	≤0.40	0.030 Max	0.030 Max	3.80～4.50	4.70～5.20	5.90～6.70	1.70～2.10

SAE M2 Tool Steel Material Mechanical Properties

Hardness, Rockwell C (tempered at 621°C, quenched at 1204°C): 62 HRC.

Hardness, Rockwell C (quenched at 1204°C) ): 65 HRC

Forged of M2 HSS Steel metal material

At first, Pre-Heating to 650-750℃，Then heat to forged temperature. Soak at 1204°C, ensure heat thorough. Then start forged, the forged temperature no low than 950℃. After forging, cool slowly.

Heat Treatment of SAE M2 Steel

M2 HSS Steel Annealing

At first, Slowly heat to 871℃，then slowly Cool to 538℃(1000℉) in heat treatment furnace. Then cool in air. After annealing hardness HBS: 255 Max.

M2 tool Steel Hardening

M2 steel having very high hardenability and should be hardened by cooling in still air. The use of a salt bath or controlled atmosphere furnace is desirable to minimize decarburization, and if not available, pack hardening in spent pitch coke is suggested.

Quenching of HSS M2 Steel material

Quenching temperature / ℃ | salt bath furnace: 1204

Quenching temperature / ℃ | controlled atmosphere furnace: 1216

The heat preservation time/min: 5 ~ 15

Quenching medium: Oil cooling

Hardness: 65 HRc Min

Tempering Of HSS M2 Tool Steel

Tempering temperature / ℃ : 540-564

After tempering hardness HRC or higher: 65 Min

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.