P295GH Pressure Vessel Steel Plate

P295GH is a normalized pressure vessel steel to EN10028-2 with a minimum yield strength of 295 MPa. As with many of our other pressure vessel grades it is has excellent weldability.

Classification ：

Boiler Pressure Vessel Steel

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product Introduction

A steel which is ideal for use in elevated working temperatures, grade P295GH is used in the fabrication of industrial pressure vessels and boilers. It is an EN10028 specified grade which governs steels used in pressurized service.

P295GH steel gives optimum performance for pressurized products that must support a creep limit greater than 155N/mm2 at 400ºC. It is a normalized steel and has excellent welding characteristics. It is used worldwide by fabricators serving the oil and gas industry and can be found in heat exchangers, weldable pressure vessels and boilers and pipework.

EN 10028
EN 10028 Part 2 & 3 is the euro norm specification for flat steel products intended for use in pressurized service. The specification covers non–alloy and alloys steels as well as weldable fine grain steels.
EN 10028 sets standards for steel used in weldable industrial boilers and pressure vessels. The specification has the same status of the old DIN and BS Standards which EN 10028 has now superseded.

offer EN 10028 specified boiler and pressure vessel quality steel from stock which is in most cases of China Origin – this is known for its superior quality. Our carbon steel plates come with mill certification and are stamped to provide full traceability. Alternatively, the customer can arrange testing via a third party testing house.

Technical Data

Chemical Composition of EN 10028 – P295GH

C	0.08 to 0.20	Cr	≤0.30
Si	≤0.40	Cu	≤0.30
Mn	0.90 to 1.50	Mo	≤0.08
P	0.025	Nb	≤0.020
S	0.015	Ni	≤0.30
Al	≤0.020	Ti	0.03
N	≤0.012	Vi	≤0.02

(Maximum values unless stated otherwise)

Mechanical Properties of EN 10028 – P295GH

Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KV J) (min)
Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	-20°	0°	+20°
Normalized	≤ 16	295	460 - 580	21	27	34	40
	16> to ≤40	290	460 - 580	21	27	34	40
	40> to ≤60	285	460 - 580	21	27	34	40
	60> to ≤100	260	460 - 580	21	27	34	40
	100> to ≤150	235	440 - 570	21	27	34	40
	150> to ≤250	220	430 - 570	21	27	34	40

(Minimum values unless stated otherwise)

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.