18CrNiMo7-6 hot rolled steel round bars

18CrNiMo7-6 is a case hardening steel with high toughness. There are a number of variants with high cleanliness requirements. All variants possess tighter composition ranges compared to the standard. produced with the quality class IQ (isotropic quality). This ensures a very low number of elongated sulphide inclusions which will give more isotropic properties. The high oxidic cleanliness will enable the steel to meet the same high cleanliness demands as for re-melted qualities

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Product introduction

18CrNiMo7-6 hot rolled steel round bars information

18CrNiMo7-6 is a case hardening steel with high toughness. There are a number of variants with high cleanliness requirements. All variants possess tighter composition ranges compared to the standard. produced with the quality class IQ (isotropic quality). This ensures a very low number of elongated sulphide inclusions which will give more isotropic properties. The high oxidic cleanliness will enable the steel to meet the same high cleanliness demands as for re-melted qualities

Product parameters

Chemical Composition

Standard	Grade	C	Mn	P	S	Si	Ni	Cr	Mo
EN 10084	18CrNiMo7-6	0.15-0.21	0.50-0.90	≤ 0.025	≤ 0.035	≤ 0.04	1.4-1.7	1.5-1.8	0.25-0.35
	1.6587

Physical Property

Density, g/cm3	7.85
Specific heat capacity J/(kg.K)	460
Electric resistivity Ohm.mm2 /m	0.18
Electric conductivity Siemens.m/mm2	5.55
Modulus of elasticity Gpa	210
Thermal expansion 10^6 m/(m.K)	100 ℃	200 ℃	300 ℃	400 ℃	500 ℃
Thermal expansion 10^6 m/(m.K)	11.1	12.1	12.9	13.5	13.9

Mechanical Property

Size mm	≤ 11	12-30	31-63
R Mpa	1180-1420	1080-1320	980-1270
Rp 0.2 Mpa	≥ 835	≥785	≥ 685
A %	≥ 7	≥ 8	≥ 5
C %	≥ 30	≥ 35	≥ 35
Kv J	≥ 44	≥ 44
Hardness HB	354-406	327-384	295-373

Forging

DIN 1.6587 | 17CrNiMo6 |18CrNiMo7-6 forging temperature:900 – 1100°C,cool slowly in the sand after forged.

Heat Treatment

Normalizing:850 – 880°C/air
Soft annealing:650 – 700°C/furnace
Stress relieve:630- 650oC
Carburising:880 – 980°C
Core hardening:830 – 870°C/water
Intermediate annealing:630 – 650°C
Case hardening:780 – 820°C/water
Tempering:150 – 200°C

Surface Hardness

Treated to improveshearability(+S):Max 255HB
Soft annealed(+A):Max 229HB
Treated to hardness range(+TH):179-229HB
Treated to ferrite-pearlite structure and hardness range(+FP):159-207HB

Application

DIN 1.6587 | 17CrNiMo6 |18CrNiMo7-6 steel for the parts which require core tensile strength and high hardness. Susceptible to the large seized parts with high wearing resistance and loading such as: Heavy Duty Bushings and Bearings, Cam Followers, Clutch Dogs, Compressor Bolts, Extractors, Fan Shafts, Heavy Duty Gears, Pump Shafts, Sprockets, Tappets, Wear Pins, Wire Guides etc..

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.