65Mn hot rolled steel round bars

65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

65Mn hot rolled steel round bars information

65Mn steel is a Chinese GB standard spring steel grade, Manganese (Mn) improves hardenability, so the strength, hardness, elasticity and hardenability are higher than that of 65# steel, but it has overheat sensitivity and temper brittleness. Water quenching tends to form cracks. The annealed state has good machinability, low cold deformation plasticity, and poor weldability.
65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.

Chemical and Mechanical

Chemical Composition

The table below lists 65Mn high carbon steel chemical composition based on heat analysis.

Chemical Composition, %
Standard	Grade	C	Si	Mn	P, ≤	S, ≤	Cr, ≤	Ni, ≤	Cu, ≤
GB/T 1222	65Mn	0.62-0.70	0.17-0.37	0.90-1.20	0.030	0.030	0.25	0.35	0.25

65Mn Material Properties

Density: 7.85 g/cm3

		Mechanical Properties
Standard	Grade	Tensile Strength, MPa, ≥	Yield Strength, MPa, ≥	Elongation, %, ≥	Reduction in Area, %, ≥	Brinell Hardness, HBW, ≤
GB/T 1222	65Mn	980	785	8.0	30	302

Notes: Bars with a diameter and side length of not more than 80 mm and flat steels with a thickness of not more than 40 mm.

Heat Treatment Specification

		Heat Treatment
Standard	Grade	Quenching temperature, °C	Quenching medium	Tempering temperature, °C
GB/T 1222	65Mn	830 ± 20	Oil	540 ± 20

Annealing process: Annealing temperature (860 ± 10) °C, heat preservation for 45-60min, furnace cooling to (750 ± 10) °C, heat preservation for 3-3.5h, and furnace cooling to 650-660 °C, then cooling out of the furnace or slow cooling in a heat preservation pit.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.