Cr12MoV hot rolled steel round bars

Cr12MoV steel has high hardenability, and those with a cross-section of 300 to 400 mm or less can be completely quenched. It can maintain good hardness and wear resistance at 300 ～ 400℃, its toughness is higher than Cr12 steel, and its volume change is minimal during quenching. It can be used to manufacture various molds and tools with large cross-sections, complex shapes, and withstand large impact loads. For example, punching dies with complex shapes, inserts on complex dies, steel deep drawing dies, wire drawing dies, threaded wire plate, cold extrusion dies, cold cutting scissors, circular saws, standard tools, measuring tools, etc.

Classification ：

Steel Round Bars

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

Cr12MoV hot rolled steel round bars information

Cr12MoV steel has high hardenability, and those with a cross-section of 300 to 400 mm or less can be completely quenched
It can maintain good hardness and wear resistance at 300 ～ 400℃, its toughness is higher than Cr12 steel, and its volume change is minimal during quenching. It can be used to manufacture various molds and tools with large cross-sections, complex shapes, and withstand large impact loads. For example, punching dies with complex shapes, inserts on complex dies, steel deep drawing dies, wire drawing dies, threaded wire plate, cold extrusion dies, cold cutting scissors, circular saws, standard tools, measuring tools, etc.
Cr12MoV steel is a high-carbon, high-molybdenum lysic steel. Its carbon content is much lower than that of Crl2 steel, and it is added with molybdenum and vanadium elements, which significantly improves the steel's thermal processing properties, impact toughness and carbide distribution . The steel has high wear resistance, hardenability, hardenability, toughness, thermal stability, compressive strength, as well as micro deformation, excellent comprehensive performance and extensive adaptability. The heat softening temperature is 520℃. The cut-off size is below 4mm and can be completely hardened. The wear resistance of this steel is 3~4 times higher than that of a low-strength tool steel, and the quenching volume is small. Hardening depth: oil quenching 200~300mm.
During the crystallization process, a large number of eutectic white carbides are formed (the carbonized substance fraction is about 20%, and the eutectic temperature is about 1150°C). These carbides are very hard and brittle. Although the carbides are broken to a certain degree after billet rolling, the carbides are distributed in bands, slabs, blocks, and piles along the rolling direction, and the degree of segregation increases with the diameter of the steel.

Chemical and Mechanical

Chemical composition% of Cr12MoV steel

C(％)	Si(％)	Mn(％)	P(％)	S(％)	Cr(％)	Ni(％)	Mo(％)	V(%)	Cu(%)
1.45～1.70	≤0.40	≤0.40	≤0.030	≤0.030	11.00～12.50	≤0.20	0.40～0.60	0.15～0.30	≤0.30

Mechanical properties of grade Cr12MoV

Proof strength Rp0.2(MPa)	Tensile strength Rm(MPa)	Impact energy KV(J)	Elongation at fracture A(%)	Reduction in cross sectionon fracture Z(%)	As-Heat-Treated Condition	Brinell hardness(HBW)
485(≥)	154(≥)	43	42	44	Solution and Aging,Annealing,Ausaging,Q+T,etc	112

Cr12MoV equivalents alloy steel

Steel	Country Code	C(%)	V(%)	Si(%)	Mn(%)	P(%)	S(%)	Cr(%)
SKD11	CNS	1.4-1.6	0.2-0.5	≦0.4	≦0.6	≦0.03	≦0.03	11.0-13.0
Cr12MoV	GB	1.45-1.70	0.15-0.30	≦0.4	≦0.4	≦0.03	≦0.03	11.0-12.5
SKD11	JIS	1.4-1.6	0.2-0.5	≦0.4	≦0.6	≦0.03	≦0.03	11.0-13.0
X165Cr-MoV12	DIN	1.55-1.75	0.1-0.5	0.25-0.40	0.2-0.4	≦0.03	≦0.03	11.0-12.0

Cr12MoV steel Range of products

Product type	Products	Dimension	Processes	Deliver Status
Plates/Sheets	Plates/Sheets	0.08-200mm(T)WL	Forging, hot rolling, and cold rolling	Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar	Round Bar, Flat Bar, Square Bar	Φ8-1200mm*L	Forging, hot rolling and cold rolling, Cast	Black, Rough Turning, Shot Blasting,
Coil/Strip	Steel Coil/Steel Strip	0.03-16.0x1200mm	Cold-Rolled&Hot-Rolled	Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes/Tubes	Seamless Pipes/Tubes, Welded Pipes/Tubes	OD:6-219mm x WT:0.5-20.0mm	Hot extrusion, Cold Drawn, Welded	Annealed, Solution and Aging, Q+T, ACID-WASHED

Heat treatment of Cr12MoV Alloy Steel

spheroidizing annealing:860℃ X 2h furnace cooling to 750℃ and then furnace cooling to 500-550℃, remove out and air cooling

Quenched + tempered:1100℃ X 20min step quenching + 700℃ X 1h tempering,remove out and air cooling

Quenching:1030℃ X 40min oil quenching(800℃ preheating,vacuum 2.5 pa) Tempering: 250℃ X 1h

Application

Cold work dies steel, steel hardenability, quenching, and tempering hardness, wear resistance, strength is higher than Cr12. Used in the manufacture of various cold stamping dies and tools with large cross- sections, complex shapes and heavy working conditions, such as punching die, trimming die, piping dies, deep drawing dies, circular saw, standard tools, and gauges Thread rolling die, etc.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.