E36WA3 Steel

E36WA3 is a structural weathering steel which is also referred to as atmospheric corrosion resistant steel.
The main alloying elements are chromium nickel and copper with added phosphorous which gives it excellent self protecting qualities.
As the steel reacts with elements in the atmosphere, the material forms a layer of rust over time which in essence protects the steel from corrosion.
E36WA3 steel is the Equivalent grades as S355J0WP (1.8945) steel in EN 10025 - 5 : 2004 standard and WR50A steel in BS 4360 standard and also FE510C1K1 steel in UNI standard.

Classification ：

Weather Resistant Steel

+8613176025308

business@sdhmsteel.com

E-mail

Pipe Standards

Product message

Product Details

The specifications

E36WA3 is a structural weathering steel which is also referred to as atmospheric corrosion resistant steel. The main alloying elements are chromium nickel and copper with added phosphorous which gives it excellent self protecting qualities. As the steel reacts with elements in the atmosphere, the material forms a layer of rust over time which in essence protects the steel from corrosion.
E36WA3 steel is the Equivalent grades as S355J0WP (1.8945) steel in EN 10025 - 5 : 2004 standard and WR50A steel in BS 4360 standard and also FE510C1K1 steel in UNI standard.

The specifications:
Thickness: 3mm--150mm
Width: 30mm--4000mm
Length: 1000mm--12000mm
Standard: ASTM EN10025 JIS GB

E36WA3 steel mechanical property

C %	Mn %	Cr %	Si %	CEV %	S %
Max 0.12	Max 1	0.3-1.25	Max 0.75	Max 0.52	Max 0.035
Cu %	P %	N %
0.25-0.55	0.06 - 0.15	Max 0.009

Method of deoxidation FN = rimming steels not permitted

For long products the P and S content can be 0.005% higher.
The E36WA3 steels may show a Ni content of max. 0,65 %
The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document

E36WA3 steel mechanical property

Grade	Min. Yield Strength Mpa						Tensile Strength MPa			Impact
E36WA3	Nominal Thickness (mm)						Nominal Thickness (mm)			degree	J
Thick mm	≤16	>16 ≤40	>40 ≤63	>63 ≤80	>80 ≤100	>100 ≤150	≤3	>3 ≤100	>100 ≤150	0	27
E36WA3	355	345	….	….	….	….	510-680	470-630	….	0	27

The tensile test values given in the table apply to longitudinal samples; in case of strip and sheet steel of widths of ≥600 mm they apply to transverse samples
If E36WA3 mechanical properties have been significantly modified by heavy coldforming, either stress relief annealing or normalised may be applied. Normalised should also be applied following hotforming outside of the temperature range of 750 - 1.050 °C and after overheating.

Factory profile

Adhering to the tenet of "integrity first, quality for survival", the company has established a complete marketing channel of "based in North China, radiating the whole country, and facing the world", and has not only established a solid strategic partnership with many domestic and foreign enterprises.We have been committed to product development, production and sales, after more than ten years of efforts, our products have been widely used in various fields.

Packing method: Packing according to customer's requirement.

The company has more than 110,000 square meters of production and processing base, fully introduced the international advanced modern automatic production and processing equipment, and took the lead in passing the ISO9001, TS16949, BV, SGS and other international well-known institutions certification.The products are mainly exported to Italy, Mexico, South Korea, Israel, Turkey, India, Pakistan, Kyrgyzstan, Oman, Kazakhstan, Vietnam, Myanmar and other countries. The company's supply is sufficient, the variety is complete, order production is fast, welcome domestic and foreign manufacturers, traders to contact us.

Company Advantages
1. We are a large-scale production enterprise integrating production, research and development, and can customize the products required by customers.
2. We have a perfect after-sales service system, which can track the problems encountered by customers in production at any time and provide corresponding technical support, so as to share our high-quality resources with customers.
3. After more than ten years of development, the company has complete product varieties and large inventory, which can be delivered in the shortest time.
4. Free samples are available.
5. With obvious price advantage, the company has complete production process, from raw materials to finished products integrated production can maximize the cost savings.